Wine Cellar Diagnostics

Viking Wine Cellar
Error Codes

Meanings, severity levels, safe checks you can perform, and when to call a technician.

Enter the code shown on your wine cellar display

Is it safe to keep using it?

Depends on code severity. Low/Medium codes often allow continued use, High severity requires immediate stop.

Can error codes be reset?

Some codes clear after power cycle. Persistent codes indicate underlying issues needing repair.

When should I stop using it?

Stop immediately for water leak codes, burning smell, or any High severity error.

Most Common Codes

DOOR E7 E6 E5 E1 E4 E3 E2

All Codes

DOOR E1 E2 E3 E4 E5 E6 E7

Error Code Directory

Click any code for detailed troubleshooting steps

Low Medium High

Code Meaning Severity Common Symptom

DOOR Door left open Low An audible alarm sounds at regular intervals. Interior temperature may be climbing. View E1 Temperature sensor failure High Display shows dashes, fluctuating numbers, or no temperature reading at all. View E2 Interior too warm High Interior air and bottles are noticeably warmer than the set storage temperature. View E3 Interior too cold Medium Bottles feel very cold and frost may be forming on interior surfaces. View E4 Fan motor fault High Some bottles warm, others cold. No air movement audible inside the cellar. View E5 Compressor overload tripped High The compressor is silent and interior temperature is climbing above the set point. View E6 Defrost cycle fault Medium Ice or frost accumulating on the rear interior panel, reducing cooling airflow. View E7 Condenser fan fault High Sides or rear of the wine cellar noticeably warmer than normal. Compressor cycling frequently. View