Dishwasher Diagnostics

Viking Dishwasher
Error Codes

Meanings, severity levels, safe checks you can perform, and when to call a technician.

Enter the code shown on your dishwasher display

Is it safe to keep using it?

Depends on code severity. Low/Medium codes often allow continued use, High severity requires immediate stop.

Can error codes be reset?

Some codes clear after power cycle. Persistent codes indicate underlying issues needing repair.

When should I stop using it?

Stop immediately for water leak codes, burning smell, or any High severity error.

Most Common Codes

I10 I20 I40 I50 I60 E4 E1 I30

All Codes

E1 E4 I10 I20 I30 I40 I50 I60

Error Code Directory

Click any code for detailed troubleshooting steps

Low Medium High

Code Meaning Severity Common Symptom

E1 Water supply fault High The dishwasher does not begin washing. No water enters the tub. View E4 Overflow/leak detected High The unit shuts down mid-cycle and water may be visible around the base of the dishwasher. View I10 Water fill timeout High The dishwasher starts but the tub remains empty. No water fill sound is audible. View I20 Drain fault High Water remains pooled at the bottom of the dishwasher after the cycle ends. View I30 Drain timeout Medium Water drains from the tub but takes much longer than normal, leaving some water behind. View I40 Leak detected High The unit shuts down immediately and water may be pooling underneath the dishwasher. View I50 Wash pump fault High Water fills the tub but the spray arms do not rotate and dishes come out dirty. View I60 Heating element fault High The wash cycle runs but water never heats up, leaving dishes greasy and poorly cleaned. View