Dishwasher High Severity
I10 Appliance Error Code

Viking Dishwasher I10 Error: Water fill timeout

What Viking Dishwasher i10 Code Means The i10 code means your Viking dishwasher didn’t receive enough water to start the cycle. Check the water supply valve under the sink first — it’s the most common cause. Also inspect the inlet hose for kinks. If the water supply is fine, the inlet valve may need professional […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

No. The dishwasher cannot complete a cycle without water. Do not repeatedly try to start it.

Can I reset the code?

Yes. After fixing the water supply issue, cancel the current cycle and restart. The error should clear.

When to stop immediately?

Stop if you notice: If water supply is confirmed open but dishwasher still won't fill, If you hear clicking from the inlet valve but no water flows.

Symptoms You May Notice

No water entering the tub

The dishwasher starts but the tub remains empty. No water fill sound is audible.

Cycle won't start

Dishwasher stops before washing begins.

No water sound

No water flowing into the tub.

Possible Causes

1

Water supply valve closed

The shutoff valve under the sink is not fully open.

DIY Possible
2

Kinked inlet hose

The water supply hose is bent or kinked.

DIY Possible
3

Faulty water inlet valve

The solenoid valve in the dishwasher has failed.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Check water supply

    Verify the shutoff valve under the sink is fully open. Turn it counterclockwise to open.

    Also check that no other appliance is using water simultaneously.

  2. 2

    Inspect inlet hose

    Pull the dishwasher out slightly and check the water supply hose for kinks or bends.

    Straighten any kinks and ensure the hose is not pinched behind the unit.

When to Call a Professional

Contact a qualified technician if:

  • Inlet valve clicks but no water enters
  • Water supply is confirmed good but fill still fails
  • Inlet valve filter is clogged with mineral deposits

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Dishwasher Repair Service Schedule Appointment

More Dishwasher Error Codes

View all codes →
E4 E1 I50 I60 I40 I30 I20