Range Hood Low Severity
FILT Appliance Error Code

Viking Range Hood FILT Error: Filter cleaning reminder

What Viking Range Hood FILT Code Means FILT is simply a reminder to clean your grease filters. Remove the metal mesh filters, wash in hot soapy water or dishwasher, dry, and reinstall. Then press and hold the filter reset button for 3-5 seconds to clear the indicator. Clean filters every 30-50 hours of cooking for […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Yes. FILT is a maintenance reminder, not a fault. The hood works normally. Clean filters for optimal performance.

Can I reset the code?

Yes. After cleaning filters, press and hold the filter reset button for 3-5 seconds.

When to stop immediately?

Stop if you notice: No need to stop use, If grease is dripping from filters, clean immediately for fire safety.

Symptoms You May Notice

Filter indicator light on

A FILT reminder is illuminated — the hood continues to work normally but filters need cleaning.

Normal operation

The range hood continues to function normally.

Possible reduced airflow

If filters are truly dirty, you may notice reduced suction.

Possible Causes

1

Timer-based reminder

The hood counts operating hours and triggers the reminder at preset intervals (typically every 30 hours of use).

DIY Possible

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Clean grease filters

    Remove the metal mesh grease filters from the underside of the hood. Wash in hot soapy water or run through the dishwasher on a hot cycle. Let dry completely before reinstalling.

    For heavy grease, soak in a solution of hot water and degreaser for 15 minutes.

  2. 2

    Reset the filter timer

    After cleaning, press and hold the filter reset button (often the light button) for 3-5 seconds until FILT clears.

    Consult your model's manual for the exact reset procedure.

When to Call a Professional

Contact a qualified technician if:

  • No professional service needed — this is routine maintenance
  • If the reset button doesn't clear the indicator, the control board may have a fault

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Range Hood Repair Service Schedule Appointment