Viking Range Hood LED Error: LED lighting fault
What Viking Range Hood LED Code Means The LED code means the task lighting has failed. Your range hood ventilation works normally — only the lights are affected. Power cycle the circuit breaker as a first step. If lights remain off, the LED driver board or LED strip needs professional replacement. This is a minor […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. The fan and ventilation system work normally. Only the lighting is affected. You can continue using the hood for cooking ventilation.
Can I reset the code?
Yes. Power cycling may reset the LED driver. If lights remain off, the LED module or driver needs replacement.
When to stop immediately?
Stop if you notice: No need to stop use — only lighting is affected, If you notice a burning smell from the LED area, disconnect power.
Symptoms You May Notice
Task lights not working
The LED lights below the hood do not turn on or flicker intermittently. Fan works normally.
Lights not working
Task lights below the hood do not illuminate.
Lights flickering
LED lights flash, flicker, or turn on/off randomly.
Possible Causes
LED driver board failure
The small circuit board that powers the LEDs has failed.
Requires ProfessionalLED strip burnout
Individual LEDs have failed on the strip.
Requires ProfessionalLoose connector
The wiring connector to the LED module has come loose from vibration.
DIY PossibleSafe Checks You Can Do
-
1
Power cycle the hood
Turn off the circuit breaker for 30 seconds and restore power. Test the lights on each brightness setting.
A power cycle can sometimes reset the LED driver.
When to Call a Professional
Contact a qualified technician if:
- LEDs do not respond after power cycle
- LED driver board shows visible damage
- All LED functions fail simultaneously
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Range Hood Repair Service Schedule Appointment