Dishwasher High Severity
I40 Appliance Error Code

Viking Dishwasher I40 Error: Leak detected

What Viking Dishwasher i40 Code Means i40 is a leak detection alarm — the flood sensor in the base has detected water. Stop using the dishwasher immediately and turn off the water supply. Check the door gasket first, then look for loose connections. Professional service is usually needed to find and fix internal leaks (from […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

No. Do not run the dishwasher with an active leak. Water damage to flooring and cabinetry can be expensive.

Can I reset the code?

No. The leak must be found and fixed. Tilting the unit to drain the base pan may temporarily clear the sensor, but the leak will recur.

When to stop immediately?

Stop if you notice: Immediately — do not run with a leak, If water is pooling under the unit.

Symptoms You May Notice

Dishwasher stops — possible leak

The unit shuts down immediately and water may be pooling underneath the dishwasher.

Dishwasher stops immediately

Unit shuts down mid-cycle.

Water under the unit

Possible water visible on floor around the dishwasher.

Possible Causes

1

Loose hose connection

A water hose clamp or connection has come loose inside.

Requires Professional
2

Damaged door gasket

The door seal is worn and water is leaking past it.

DIY Possible
3

Cracked tub or sump

A crack in the wash tub allowing water into the base.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Check for visible leaks

    Turn off water supply, carefully pull dishwasher out, and look for water pooling in the base pan or around hose connections.

    Have towels ready. Turn off the circuit breaker before pulling the unit out.

  2. 2

    Inspect door gasket

    Check the rubber gasket around the door for tears, gaps, or food debris preventing a proper seal.

    Clean gasket with warm soapy water and check for deformation.

When to Call a Professional

Contact a qualified technician if:

  • Leak from internal hose connections
  • Cracked sump or tub
  • Flood switch triggers even after tipping water from base pan

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Dishwasher Repair Service Schedule Appointment