Viking Dishwasher E1 Error: Water supply fault
What Viking Dishwasher E1 Code Means E1 is a water supply fault on certain Viking dishwasher models. Check the shutoff valve and inlet hose first. If water supply is good, the inlet valve needs professional replacement.
Quick Assessment
Answer to continue safely
Is it safe to keep using?
No. Cannot operate without water.
Can I reset the code?
Yes. Fix water supply, then cancel and restart the cycle.
When to stop immediately?
Stop if you notice: If supply is confirmed open but no water enters.
Symptoms You May Notice
Cycle won't start — no water
The dishwasher does not begin washing. No water enters the tub.
No water entering
Dishwasher empty, cycle cannot start.
Possible Causes
Water supply closed
Shutoff valve not open.
DIY PossibleInlet valve failure
Solenoid valve not opening.
Requires ProfessionalSafe Checks You Can Do
-
1
Check water supply valve
Verify the shutoff valve under the sink is fully open.
Also check for frozen pipes in winter.
When to Call a Professional
Contact a qualified technician if:
- Inlet valve does not open electrically
- Water pressure is adequate but valve doesn't actuate
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Dishwasher Repair Service Schedule Appointment